44
– Faxing: Fcode Transmission
MC361/MC561/CX2731 MFP Advanced User’s Guide
6 Press the down arrow key to select [Fcode Box], then press
<OK>.
7 Press the down arrow key to select the box number you want to
delete, then press <OK>.
8 Enter the PIN number if necessary, then press <OK>.
9 Press the down arrow key to select [Delete], then press <OK>.
10 Use the left and right arrow keys to select [Yes], then press
<OK>.
Fcode Transmission Using a Sub Address
By entering a sub address, Fcode confidential transmission and Fcode
bulletin board transmission can be done.
Note
Be sure to have the necessary sub address and PIN number on
hand.
1 Place your document with text face up in the ADF or face down
on the document glass.
2 Press the <FAX> key.
3 Make sure that [Fax] is selected and press <OK> to open the fax
standby screen.
4 Press the down arrow key to select [Fax Functions], then press
.
5 Press the down arrow key to select [Fcode Tx], then press
<OK>.
6 Press the down arrow key to select [ON], then press <OK>.
7 Enter the sub address of the box registered in the recipient MFP.
8 Use the arrow keys to select [Enter], then press <OK>.
9 Press the left arrow key to go back to the start screen.
OK
To Next Page
Loading...
Need help?
General
