91
– Scanning: Scan to Local & Remote PCs
MC361/MC561/CX2731 MFP Advanced User’s Guide
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [Scanner Functions],
then press <OK>.
6 Press the down arrow key to select [E-mail Setup], then
press <OK>.
7 Press the down arrow key to select [Transmit or Not
Transmit MDN Response] and then press <OK>.
8 Press the down arrow key to select [ON] and then press
<OK>.
9 Press the left arrow to go back to the main screen.
Scan to Local & Remote PCs_____
Note
To enter the [Admin Setup] menu, a password is necessary. The
default password is aaaaaa.
Setting the PC Scan Mode
You can select either simple scan mode or secure scan mode for the
scanning to local PC function.
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [Scanner Setup], then press
<OK>.
To Next Page
Loading...
Need help?
General
