Oki CX2731MFP - Setting the Wait Time for a Response

57 – Faxing: Fax Reception Settings
MC361/MC561/CX2731 MFP Advanced User’s Guide
10 Press the down arrow key to select [Forwarding Number], then
press <OK>.
11 Enter a forwarding number.
12 Use the arrow keys to select [Enter], then press <OK>.
13 Use the left arrow key to go back to the main screen.
Setting the Wait Time for a Response
Use this to set how long the MFP waits to respond to an incoming call
and start receiving the fax.
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press [OK].
5 Press the down arrow key to select [Fax Setup], then press
<OK>.
6 Press the down arrow key to select [Other Settings], then press
<OK>.
7 Press the down arrow key to select [Ring Response], then press
<OK>.
8 Press the down arrow key to select a time, then press <OK>.
9 Use the left arrow key to go back to the main screen,
Note
When the MFP is connected to a line supporting the number
display function and a phone supporting the number display
function is connected to the MFP, set [Waiting time for a
response] to [5 sec.], [10 sec.], [15 sec.], or [20 sec.].