92
– Scanning: Scan to Local & Remote PCs
MC361/MC561/CX2731 MFP Advanced User’s Guide
6 Press the down arrow key to select [TWAIN Setup], then press
<OK>.
7 Press the down arrow key to select [PC Scan Mode], then press
<OK>.
8 Press the down arrow key to select a mode, then press <OK>.
9 Press the left arrow to go back to the main screen.
Enable the Network TWAIN Settings
Perform the following procedure to use the scan to local PC and scan
to remote PC functions through to the network.
Important!
If you select [Disable] on this function, you cannot use scan
to local PC and scan to remote PC via network.
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [Scanner Setup], then press
<OK>.
6 Press the down arrow key to select [TWAIN Setup], then press
<OK>.
7 Make sure that [Network TWAIN Setup] is selected, then press
<OK>.
8 Press the down arrow key to select [ON], then press <OK>.
9 Press the left arrow to go back to the main screen.
To Next Page
Loading...
Need help?
General
