309
– MFP Memory: Flash Memory
MC361/MC561/CX2731 MFP Advanced User’s Guide
c) Enter the password.
d) Use the arrow keys to select [Enter], then press <OK>.
e) Press the down arrow key to select [Management], then press
<OK>.
f) Press the down arrow key to select [Storage Maintenance
Setup], then press <OK>.
g) Press the down arrow key to select [Initial Lock], the press
<OK>.
h) Press the down arrow key to select [Enable], then press
<OK>.
9 Press the left arrow key to go back up to the main screen.
Flash Memory________________
Initializing the Flash Memory
Flash memory has saved mail templates, font data, etc., stored on it.
Important!
When you initialize a flash memory, the data stored on it is
deleted.Press the <SETTING> key on the control panel.
Note
For protection against accidentally initializing the SD card—
causing the loss of data stored on the card—the MFP default for
Initial Lock is enabled. Before you can initialize the SD card, you
must first change the Initial Lock setting to disabled.
To enter the [Admin Setup] menu, an administrator password is
required. The default password is “aaaaaa”.
To Next Page
Loading...
Need help?
General
