310
– MFP Memory: Flash Memory
MC361/MC561/CX2731 MFP Advanced User’s Guide
1 Press the <SETTING> key on the control panel.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [Management], then press
<OK>.
6 Disable the Initial Lock:
a) Press the down arrow key to select [Storage Maintenance
Setup], then press <OK>.
b) Press the down arrow key to select [Initial Lock], the press
<OK>.
c) Press the down arrow key to select [Disable], then press
<OK>.
d) Press the left arrow key to go back up to [Management], then
[press <OK>.
7 Reformat the Flash Memory:
a) Press the down arrow key to select [Flash Memory Setup],
then press <OK>.
b) Make sure that [Initialize] is selected, then press <OK>.
c) Make sure that [Execute] is selected, then press <OK>.
d) A confirmation message appears. Select [Yes] to continue.
(Select [No] to cancel.)
The MFP restarts.
8 Go back into the menu and re-enable the Initial Lock:
a) Press the <SETTING> key on the control panel.
b) Press the down arrow key to select [Admin Setup], then press
<OK>.
c) Enter the password.
d) Use the arrow keys to select [Enter], then press <OK>.
e) Press the down arrow key to select [Management], then press
<OK>.
f) Press the down arrow key to select [Storage Maintenance
Setup], then press <OK>.
To Next Page
Loading...
