34
– Faxing: Setting a Prefix
MC361/MC561/CX2731 MFP Advanced User’s Guide
Perform the following procedures when specifying a destination using
the ten-key pad.
1 On the destination entry screen, press the down arrow key to
select [PreFix], then press <OK>.
2 Enter a destination number.
3 Use the arrow keys to select [Enter], then press <OK>.
Using a Prefix When Registering a
Number to Speed Dial
Even though you cannot use a Prefix before using a speed dial
number, you can attach a prefix as part of a programmed speed dial
number.
Perform the following procedures to register a number to speed dial.
Note
For details on how to register a number to speed dial, see the
Basic User’s Guide on the DVD supplied with your MFP.
1 On the fax number entry screen, press the up and left arrow keys
to select [PreFix], then press <OK>.
The area code is displayed as “N”.
2 Enter a fax number.
3 Use the arrow keys to select [Enter], then press <OK>.
To Next Page
Loading...
