48
– Faxing: Security Functions
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
• The data stored in an Fcode confidential box is automatically
deleted when you remove the data.
• The data stored in an Fcode bulletin box is not deleted when the
recipient gets it.
1 Press the <SETTING> key.
2 Press the down arrow key to select [Store Document Settings],
then press <OK>.
3 Press the down arrow key to select [Delete], then press <OK>.
4 Make sure that [Fcode Bulletin board] is selected, then press
<OK>.
5 Press the down arrow key to select the desired box number, then
press <OK>.
6 User the arrow keys to select [Yes], then press <OK>.
Security Functions ____________
Note
• To enter the [Admin Setup] menu, the administrator password is
necessary. The default password is “aaaaaa”.
• For details on how to specify a destination, refer to the Basic
User’s Guide on the DVD supplied with your MFP.
The MFP has the following three security functions:
• ID check transmission
• Checking broadcast destination
• Pressing dial twice
These functions prevent you from transmitting faxes to the wrong
destination.
To Next Page
Loading...
Need help?
General
