43
– Faxing: Fcode Transmission
MC361/MC561/CX2731 MFP Advanced User’s Guide
5 Press the down arrow key to select [Fax Functions], then press
<OK>.
6 Press the down arrow key to select [Fcode Box], then press
<OK>.
7 Press the down arrow key to select a box number, then press
<OK>.
8 Make sure that [Register] is selected, then press <OK>.
To edit a registered Fcode Confidential Box, enter the PIN number
and select [Edit].
9 Press the down arrow key to select [Bulletin Box], then press
<OK>.
10 Make sure that [Box Name] is selected, then press the right
arrow key.
11 Enter a box name.
12 Use the arrow keys to select [Enter], then press <OK>.
13 Press the down arrow key to select [Sub-Address], then press
the right arrow key.
14 Enter a sub address.
15 Use the arrow keys to select [Enter], then press <OK>.
16 Press <OK>.
Deleting Fcode Boxes
Important!
You cannot delete an Fcode box if there is data in it.
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [Fax Setup], then press
<OK>.
To Next Page
Loading...
Need help?
General
