Oki CX2731MFP - Page 282

282 – Issues: Copying Issues
MC361/MC561/CX2731 MFP Advanced User’s Guide
The size of the copied
output is different from
the size of the original
document.
Is the proper size
paper for the
document loaded on
the paper tray?
Load the proper size
paper for the
document.
Is the zoom ratio
properly set?
Set the proper zoom
ratio.
Is [Repeat] set to
[ON]?
Set [Repeat] to [OFF].
A part of the document
image is missing on the
copied output.
Is [Edge Erase] set
to [ON]?
Set [Edge Erase] to
[OFF].
Is [Margin] set to
[ON]?
Set [Margin] to [OFF].
Is [N-in-1] set to
[ON]?
Set [N-in-1] to [OFF].
Symptom Point to check Remedy