174
– MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Fcode
Box
Bulle-
tin Box
Box
Name
(NULL) Sets a bulletin box
name.
Maximum 16 characters.
Sub-
Addres
s
(NULL) Sets a sub-address for
your bulletin box.
Maximum 20 characters.
Delete Deletes an Fcode box.
Secu-
rity
Func-
tion
ID Check Tx OFF Sets whether or not to
use the ID check trans-
mission.
Check broadcast dest. ON Sets whether or not to
indicate the destination
number before starting
transmission.
Confirm Dial OFF Sets whether or not to
reenter the destination
fax number before send-
ing a fax.
Other
Settings
Redial Tries 2 times Sets the number of
redial attempts.
Range: 0 to 10 times.
Redial Interval 1 minute Sets the time between
redial attempts. Range:
1 to 6 minutes.
Ring Response 1 ring Sets the number of rings
required before receiv-
ing an incoming fax.
Dialing Pause Duration 2 seconds Sets the dial pause time.
Range: 0 to 10 seconds.
Rx Reduc. Rate Auto Sets the reception
reduction rate.
Reduc. Margin 1/2-inch
(24 mm)
Sets the threshold level
of reception reduction.
Range: 0 to 3.3 inches
(0 to 85 mm).
Item Default Description
To Next Page
Loading...
