183
– MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Print
menu
Print Setup Width 8.5 inch
(216
mm)
Sets the default width of
the custom size paper.
Range: 64 to 216 mm
(2.5 to 8.5 inches).
Length 11 inch
(279
mm)
Selects the default
length of the custom size
paper. Available range:
127 to 1321 mm (5.0 to
52.0 inches).
Printer
Adjust
Manual Timeout 60 sec-
onds
Sets how many seconds
the MFP will wait for
paper to be fed before
cancelling a job.
Wait Timeout 40 sec-
onds
Sets how many seconds
the MFP will wait when
received data pauses
before forcing a page
eject. In PostScript emu-
lation mode a job is can-
celed if timeout occurs.
Print Mode with-
out Color Toner
Alarm Sets whether to print a
job in black-and-white or
pause it in an alarm
state when a color toner
empty error occurs.
Jam Recovery Enable Sets whether or not the
MFP will attempt to re-
print any pages lost due
to a paper jam once the
jam has been cleared.
Paper Black Set-
ting
0 Sets values to make a
fine adjustment to very
visible faded print results
or light specks (or
streaks) results in plain
paper black mode.
Item Default Description
To Next Page
Loading...
