252
– Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Power Off and
Wait for a while
%ERRCODE%:C
ondensing Error
Blinks Condensation has formed in
the MFP.
Turn the MFP off and wait for
a while.
Power Off/On
%ERRCODE%:D
ownload Error
Blinks An error occurred.
Turn the MFP off and then on
again.
If the error is not resolved,
call your local service dealer.
Power Off/On
%ERRCODE%:Er
ror
Blinks A fatal error occurred.
Turn the MFP off and then on
again.
If the error is not resolved,
call your local service dealer.
Inspection is
required
%ERRCODE:Erro
r
Blinks A fatal error occurred.
Call your local service dealer.
Power Off/On
%ERRCODE%:Er
ror
%FATALSTRING
1%
Blinks A fatal error occurred.
Turn the MFP off and then on
again.
If the same error occurs, turn
the MFP off and then on
again. If the error is not
resolved, or the same error
occurs again, call your local
service dealer.
Code Message
<STATUS>
key
Cause/Remedy
To Next Page
Loading...
