254
– Issues: Error Messages
MC361/MC561/CX2731 MFP Advanced User’s Guide
Inspection is
required
%ERRCODE%:
SIP Error
Blinks Processing of scanned image
has failed.
Turn the MFP off and then on
again.
If the error is not resolved,
call your local service dealer.
Please call
service
Scanner unit
failed to detect
printer unit
Blinks An error occurred between
the scanner and printer units.
Turn the MFP off and then on
again.
If the error is not resolved,
call your local service dealer.
SIP Firmware
Missing
Please see Help
for details
Blinks A board failure has been
detected.
Turn the MFP off and then on
again.
If the error is not resolved,
call your local service dealer.
Wait a Moment
Network
Configuration
Writing
Lights up Changed network settings are
being stored.
Code Message
<STATUS>
key
Cause/Remedy
To Next Page
Loading...
