293
– Issues: Print Issues
MC361/MC561/CX2731 MFP Advanced User’s Guide
Color of the
printed image is
not what you
expect.
The toner is low. Replace the toner
cartridge.
The setting of [Black Finish]
is not suitable for the
application.
On the printer driver,
select [Composite
Black (CMYK)] of [True
Black (K)] for [Black
Finish].
The color adjustment has
been modified.
Do color matching
from the printer driver.
The color balance is out of
adjustment.
Press the <SETTING>
key and select [Admin
Setup] > [Print Setup]
> [Color Menu], and
then do [Adjust
Density].
Color registration is out of
alignment.
Open and close the top
cover.
Or, press the
<SETTING> key and
select [Admin Setup]
> [Print Setup] >
[Color Menu], and
then do [Adjust
Registration].
Solid printing of
CMY 100% is
too light.
[CMY100% Density] is set to
[Disable].
Press the <SETTING>
key and select [Admin
Setup] > [Print Setup]
> [Color Menu] >
[CMY100% Density],
and then select
[Enable].
Symptom Cause Remedy
To Next Page
Loading...
