302
– Issues: MFP Issues
MC361/MC561/CX2731 MFP Advanced User’s Guide
A print job has
stopped in the
middle of the
printing process.
As a result of
processing print jobs
continuously, the fuser
unit has become hot.
The fuser unit is
cooling off.
Wait for a while.
When the fuser unit gets
cooler, printing restarts
automatically.
As a result of
processing print jobs
continuously for a long
time, the temperature
in the MFP inside has
become too high. The
MFP is cooling off.
Wait for a while.
When the MFP gets cooler,
printing restarts
automatically.
The specified
settings such as
the time setting
have been erased.
The MFP was turned
off for a long time or
every day.
The life of the battery may
have ended. Call your local
service dealer.
The image data
stored in memory
has been erased.
More than 72 hours
has passed after the
MFP was turned off.
The stored image data is
kept for 72 hours.
A report is printed out but
the erased data cannot be
restored.
Memory is
insufficient.
You have been
launched Multiple
applications.
Close the applications you
are not using.
It takes a long time
to finish printing.
The processing speed
of the computer may
be slowing down the
print job.
Use a computer with faster
processing speed.
You have selected
[High Quality] on the
[Job Options] tab of
the printer driver.
Select [Fine / Detail
(600x1200)] or [Normal
(600x600)] on the [Job
Options] tab of the printer
driver.
The print data is
complicated.
Make the data simpler.
The printer driver
is not correctly
displayed on
Macintosh.
The printer driver may
not be operating
correctly.
Uninstall the printer driver
and install it again.
Symptom Cause Remedy
To Next Page
Loading...
Need help?
General
