98
– Printing: Labels
MC361/MC561/CX2731 MFP Advanced User’s Guide
Set the paper size and type for the MFP tray using the MFP control
panel. Then, make print settings including paper size and paper tray
using the printer driver.
Important!
You cannot use duplex printing on labels.
For all Printer Drivers
1 Load the labels on the MP tray, then press the set button
inwards.
2 Open the face up stacker at the rear of the MFP.
3 Press the <SETTING> key.
4 Press the down arrow key to select [Paper Setup], then press
<OK>.
5 Press the down arrow key to select [MP tray], then press <OK>.
6 Make sure [Paper Size] is selected, then press <OK>.
7 Press the down arrow key to select [A4] or [Letter], then press
<OK>.
8 Press the down arrow key to select [Media Type], then press
press <OK>.
9 Press the down arrow key to select the [Labels], then press
<OK>.
10 Use the left arrow key to go back to the main screen.
11 On the computer, open the file you want to print.
12 Configure the paper source on the printer driver as follows.
Windows PCL/PCL XPS Printer Driver
1 Follow the steps under ‘For all Printer Drivers” above.
2 From the "File" menu, select "Print".
3 Click "Preferences" (or “Properties”, depending on the version of
Windows you are using).
To Next Page
Loading...
Need help?
General
