Oki MC860 Maintenance Manual

43967002TH Rev.1
116 /
Oki Data CONFIDENTIAL
3. Installation
The shaded portion shows the default setup value when shipped from the factory.
Item Contents
Default
Settings
(Common
to Scan
To E-mail
and Scan
To USB
memory)
Grayscale OFF
ON
Set default setup of grayscale.
ON Document is scanned in B/W 255
gradations.
OFF Document is scanned in B/W 2
gradations.
FileFormat Color PDF
TIFF
JPEG
XPS
Set default setup of the file format when
scanning in color.
Mono
(Grayscale)
PDF
TIFF
JPEG
XPS
Set default setup of the file format when
scanning in grayscale.
When grayscale is set to OFF, JPEG
and XPS images are not displayed.
Mono
(Binary)
PDF
TIFF
Set default setup of the file format when
scanning in monochrome.
ComprsRT
(compression
Rate)
Color High
Medium
Low
Set default setup of the compression
ratio when scanning in color.
Mono
(Grayscale)
High
Medium
Low
Set default setup of the compression
rate when scanning in B/W with
grayscale being set to ON.
Mono
(Binary)
High
Medium
Raw format
Set default setup of the compression
rate when scanning in B/W with
grayscale being set to OFF
EdgeErase Edge Erase OFF
ON
Set default setup whether or not to
erase shade that is created in the
surrounding area of two-page spread
document.
Width 5~50mm
(1mm step)
0.2~2.0inch
(0.1inch step)
Set default setup of erasing width when
erasing frame.
(Display in units of mm or display
in units of inch can be switched by
changing the unit of display on the
system setup).
The shaded portion shows the default setup value when shipped from the factory.
Item Contents
Default
Settings
(Common
to Scan
To E-mail
and Scan
To USB
memory)
EraseCenter Erase Center OFF
ON
Set default setup whether or not to
erase shade that is created in the
center of two-page spread document.
EraseWidth 1~50mm
(1mm step)
0.1~2.0inch
(0.1inch step)
Set default setup of erasing width when
erasing center.
(Display in units of mm or display
in units of inch can be switched by
changing the unit of display on the
system setup).
Contrast -3
-2
-1
0
+1
+2
+3
Set default setup of contrast.
Hue -3
-2
-1
0
+1
+2
+3
Set default setup of color phase.
Saturation -3
-2
-1
0
+1
+2
+3
Set default setup of color saturation.
RGB -3
-2
-1
0
+1
+2
+3
Set default setup of the relative amount
of red, green and blue.

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb