Oki MC860 Maintenance Manual

43967002TH Rev.1
125 /
Oki Data CONFIDENTIAL
3. Installation
The shaded portion shows the default setup value when shipped from the factory.
Item Contents
Network
Setup
Network Scale Small
Normal
Normal This setting is normally.
The MFP works effectively even when it
is connected to HUB containing spanning
tree function. However, if the MFP is
connected to a small scale LAN containing
a few units of PC, booting up time takes
longer as demerit.
Small scale It supports the small scale
LAN containing a few units of PC, up to
large scale LAN. However, there are cases
that the MFP does not work effectively
when it is connected to HUB containing
spanning tree function.
HUB Link Setting Auto Negotiate
100BASE-TX FULL
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALF
Set connection mode with HUB.
Set “Auto Negotiate” normally.
Network PS - Protocol ASCII
RAW
Set PS – protocol.
Factory Default Execute Setup of network, mail server, LDAP
server and secure protocol server are
returned to the default setup.
The shaded portion shows the default setup value when shipped from the factory.
Item Contents
Mail Server
Setup
SMTP Server IP address
or name of
server
Sets IP address of SMTP server or sets
name of server.
SMTP Port 1
~
25
~
65535
Set port number of SMTP server.
Use the default setup normally.
SMTP Encryption None
SMTPS
STARTTLS
Set encryption of communication with mail
server (SMTP).
POP3 Server IP address
or name of
server
Sets IP address of POP3 server or sets
name of server.
It is required for “POP before SMTP”
certification or [Mail reception print].
POP3 Port 1
~
110
~
65535
It sets the port number that is prepared by
the POP3 of the POP3 server side.
Use the default setup normally. .
It is required for “POP before SMTP”
certification or [Mail reception print].
POP Encryption None
POP3S
STARTTLS
Set encryption of communication with mail
server (POP).
Authenticaion method None
SMTP
POP
Set certification method for E-mail
transmission.
SMTP performs the SMTP server
certification.
POP performs the POP before SMTP
certification.
SMTP User ID User ID It sets the log-in name that is used when
logging on the sever used for SMTP
certification
SMTP Password Password It sets the password that is used when
logging on the sever used for SMTP
certification.

Oki MC860 Specifications

Printing Specifications

print speed color	26 ppm
print speed black & white	33 ppm
time to first page color	10 seconds
time to first page black & white	9.5 seconds
print resolution	1200 x 600 dpi
processor	500 MHz PowerPC CPU
duty cycle	75, 000 prints per month

Copying Specifications

copy speed color	26 cpm
copy speed black & white	33 cpm
first copy out color	14.5 seconds
first copy out black & white	13 seconds
copy resolution	600 x 600 dpi

Scanning Specifications

scan type	Color and black & white
max scan area	11" x 17"
scan speed black & white	33 spm
scan speed color	26 spm
scan resolution	600 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	2 seconds/page
fax resolution	600 x 600 dpi
speed dial locations	500 locations
broadcast transmission locations	530 locations

Power and Acoustic Noise

power consumption peak	1, 300W
power consumption standby	160W Avg.
power save mode	≤25W
acoustic noise operating	54dB
acoustic noise standby	≤37dB

System Memory

standard imaging RAM	512 MB
max imaging RAM	768 MB
hard disk drive	40 GB

Weight and Dimensions

1-tray configuration dimensions	22.2" x 25.9" x 26.3"
2-tray configuration dimensions	33.3" x 30.2" x 44.5"
weight 1-tray configuration	149.9 lb
weight 2-tray configuration	200.6 lb
weight 3-tray configuration	211.6 lb