EasyManuals Logo

Oki MC860 Maintenance Manual

Oki MC860
391 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #307 background imageLoading...
Page #307 background image
Oki Data CONFIDENTIAL
43967002TH Rev. 1
307 /
7. Troubleshooting
Error Code
Displayed message Descriptions
491
492
493
No Paper
On %TRAY%
Please set paper
(%MEDIA_SIZE%).
To cancel
Select [Cancel]
Printing request is issued to an empty tray.
Load paper that was set in %MEDIA_SIZE%.
(It takes a while until the status disappears after you
have closed the tray and the lever lifted.)
%TRAY%
Tray1
Tray2
Tray3
The unit of paper size in Custom: The unit specified for
MPTray (menu setting) is used if no unit is specified by
the driver. When the driver specifies a unit, the unit is
used for display.
540
541
542
543
Please check
%COLOR%
Toner cartridge:
%ERRCODE%
Something is wrong with the toner sensor.
This status is indicated in Shipping Mode only.
If the same error is detected in FACTORY Mode, it is
indicated as service call of 163.
Error 540 : Y
Error 541 : M
Error 542 : C
Error 543 : K
544
545
546
547
Please check
%COLOR%
Toner cartridge:
%ERRCODE%
Shows that the toner cartridge lever has not been
locked.
Error 544 : Y
Error 545 : M
Error 546 : C
Error 547 : K
Error Code
Displayed message Descriptions
550
551
552
553
%COLOR% Toner
Regional Mismatch:
%ERRCODE%
The signature ID of toner cartridge can not be
recognized (Unauthorized third party).
As probable missing to measure the amount of toner,
the printer notifies error status and stop printing.
Error 550 : Y
Error 551 : M
Error 552 : C
Error 553 : K
Four following behavior is carried out by mode of
operation.
1. Only warning display .(This error is not displayed).
2. Warning status takes effect at Cover Open/Close.
3. With no automatic concentration compensation .
4. This error is displayed and it stops.
When this error occurs in more than one color toners,
the all tonners that have this error status and a high
most priolity error code are displayed.
Example)
When this error occurs in all toners:
YMCK
Toner Regional Mismatch:
550
When this error occurs in MC toners:
MC Toner Regional Mismatch:
551

Table of Contents

Other manuals for Oki MC860

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki MC860 and is the answer not in the manual?

Oki MC860 Specifications

Printing Specifications IconPrinting Specifications
print speed color26 ppm
print speed black & white33 ppm
time to first page color10 seconds
time to first page black & white9.5 seconds
print resolution1200 x 600 dpi
processor500 MHz PowerPC CPU
duty cycle75, 000 prints per month
Copying Specifications IconCopying Specifications
copy speed color26 cpm
copy speed black & white33 cpm
first copy out color14.5 seconds
first copy out black & white13 seconds
copy resolution600 x 600 dpi
Scanning Specifications IconScanning Specifications
scan typeColor and black & white
max scan area11" x 17"
scan speed black & white33 spm
scan speed color26 spm
scan resolution600 dpi
Fax Specifications IconFax Specifications
fax modem33.6 Kbps Super G3
transmission speed2 seconds/page
fax resolution600 x 600 dpi
speed dial locations500 locations
broadcast transmission locations530 locations
Power and Acoustic Noise IconPower and Acoustic Noise
power consumption peak1, 300W
power consumption standby160W Avg.
power save mode≤25W
acoustic noise operating54dB
acoustic noise standby≤37dB
System Memory IconSystem Memory
standard imaging RAM512 MB
max imaging RAM768 MB
hard disk drive40 GB
Weight and Dimensions IconWeight and Dimensions
1-tray configuration dimensions22.2" x 25.9" x 26.3"
2-tray configuration dimensions33.3" x 30.2" x 44.5"
weight 1-tray configuration149.9 lb
weight 2-tray configuration200.6 lb
weight 3-tray configuration211.6 lb

Related product manuals