APPLIED OPERATIONS/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2-24
Page
3. When [Kalman] is selected, enter the accumulation count in the text box. And
select the [Frame Kalman] option button displayed.
The accumulation count can be set up a maximum of 63 times.
When 0 is set as the number of times of accumulation, an ordinary image
acquisition is to be performed.
4. When [Accumulate To Peak] is selected, enter the addition count in the text box.
5. Click the <Once> button in the [Acquire] panel.
The acquired image will be displayed in the [Live] panel.
[Frame Kalman] option
button
Enter the accumulation
count.
TIP
To Next Page
Loading...
