APPLIED OPERATIONS/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2-25
Page
2 Acquiring Image in Accu mulation Mode (Line mode)
Image acquisition in the line mode can be performed when you use the
FV300 system with AOTF (FV5-COMBA).
1. From the page tabs on the bottom right of the [Acquire] panel, select the [Settings]
sub-panel.
Fig. 2-10 [Settings] sub-panel
2. In the [Filter Mode] group box, select the [Kalman] option button.
3. Enter the accumulation count in the text box and select the [Line Kalman] option
button displayed.
NOTE
[Filter Mode] group box
Select the accumulation mode.
Two accumulation modes, [Kalman] and
[Accumulate To Peak] are available.
[Line Kalman] option
button
Enter the accumulation
count.
To Next Page
Loading...
