APPLIED OPERATIONS/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2-83
Page
1. Acquire an image in the XY observation mode. For the operation procedure, see
section 2-2-1, “Image Acquisition with XY observation”.
2. Select [Line XT] option button or <Slant> under the [Depth XZ] option button in the
[Mode] group box in the [Acquire] panel. A line indicating the control range appears
in the [Live] panel.
(<Slant > under the [Depth XZ] option button is selected in the following Fig.)
3. Move the line to the area you want to observe. To move the line,place the mouse
pointer on it and drag the mouse.
4. Change the line length. Place the mouse pointer on the line and click to display
square handles on the two extremities of the line. Then place the mouse pointer on
either handle and drag it to change the line length.
5. Change the inclination angle of the line. Right-click the mouse on the line and,
when a pop-up menu appears, select [Rotate] from it.
Handle
To Next Page
Loading...
