APPLIED OPERATIONS/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2-84
Page
6. The inclination angle of the line can be varied according to the mouse pointer
movement.
Place the mouse pointer on an inclined position and click the mouse left button to
fix the line inclination angle.
7. Set the interval time or the number of scans.
The operation procedure is same as that in the XY observation mode. See section
2-2-2, “XT Observation Mode”.
8. Acquire the image by clicking <XYZ>, <XYT>, <XYZT> etc.
9. After image acquisition, select <Normal>under the [Surface XY] option button in
the [Mode] group box in the [Acquire] panel to return from the image acquisition
mode.
To Next Page
Loading...
