APPLIED OPERATIONS/Image Acquisition
IV.
OPERATION INSTRUCTIONS
IV .
2-96
Page
5. Select the <Make REX mask> button.
The [REX Live] panel (the REX mask file) is made in the [Display] panel.
When the [REX Live] panel has already been created on the FV300
software, A panel is continuously created after [REX_Live0#].
The REX mask file can be saved.
The saving procedure is completely the same as that of a display.
For details, refer to section 2-3-1-2, “Saving a Display" in this manual.
Make the REX mask file
which masks the region
outside of the specified
region.
TIP
TIP
<Make REX mask> button
To Next Page
Loading...
