APPLIED OPERATIONS/Changing the Image Display Method
IV.
OPERATION INSTRUCTIONS
IV .
2-220
Page
2. Click the <Experiment List> button in the toolbar at the bottom of the [Tile] panel.
The [Experiments in Memory] dialog box appears as shown below.
Fig. 2-80 [Experiments in Memory] Dialog Box
3. From the [Experiments in Memory] dialog box, select the file name of the second
image to be displayed and drag it into the frame at the top right of the [Tile] panel.
The icon of the second image is displayed in the frame at the top left of the [Tile]
panel and the acquisition parameters used in the image acquisition are displayed in
the [Experiment] panel.
The mouse pointer turns into the image icon during dragging.
4. Click the <Done> button in the [Experiments in Memory] dialog box to close it.
5. Set the number of images to be displayed together by using the <
> or <
>
buttons in the [Columns] and [Rows] text boxes. How the images will be arranged
can be confirmed in the gray box at the upper part of the [Tiling] group box.
6. When there are multiple images to be displayed, select the following items in the
[Tile Over] drop-down list.
x Self: The same images as the image being displayed will be displayed.
x Z: Images are displayed according to change in cross-section.
x T: Images are displayed according to change in time.
<Experiment List> button
TIP
To Next Page
Loading...
