APPLIED OPERATIONS/Changing the Image Display Method
IV.
OPERATION INSTRUCTIONS
IV .
2-221
Page
7. When displaying images acquired in a multi-channel mode, select the display
method from the [Display Type] drop-down list.
8. Click the <New Page> button. A new [Display] panel appears showing the two
images one above the other.
The image of the file displayed in the frame at the top left of the [Tile] panel is
displayed on the upper part of the [Display] panel, and that of the file displayed in
the frame at the top right is displayed on the lower part.
Use the <Retile> button when it is required to re-arrange the images in
the currently displayed [Display] panel.
Fig. 2-81 Panel Displaying Two Different Images Together
NOTE
To Next Page
Loading...
