Using folders and files
101
Browse Window
3 Configure the rename rule.
Configure the [Prefix], [Base], and [Suffix] blocks of the rename rule.
If [Optional String] is selected, enter the optional string in the box displayed at the
bottom or select the optional string from the pull-down list.
If [Shooting Date] or [Shooting Date & Time] is selected, select the display format
from the pull-down list displayed at the bottom.
If [Serial Number] is selected, enter the starting number and number of digits.
Also, enter separator characters between the blocks as needed.
After each block is configured, the new file names appear in the [New Name] box.
[Cancel] Cancels the renaming of all file names.
[OK] All files are renamed according to the configured
rename rule.
To Next Page
Loading...