Update Firmware
251
Update Firmware
7 Select the applicable firmware from the [Selection of available
firmware] list.
When the [Details] button is clicked, the web browser starts and the details page
for the selected firmware is displayed.
8 Click the [Update] button.
After the confirmation message and [Software License Agreement] dialog box are
displayed, the firmware is downloaded and transferred to the camera.
9 After “The firmware has been transferred successfully” is
displayed, follow the on-screen instructions and unplug the
USB/IEEE1394 (FireWire) connection cable from the camera.
Once disconnected, the firmware update will begin automatically.
• When [Display all available versions] is checked, other applicable versions of
firmware on the server are also displayed. These are displayed with an
exclamation mark on the left. (Please note that these versions may alter the
camera’s current feature set or available languages.)
[Update Firmware] dialog box - updating
Do not interrupt the camera’s power source, or press any buttons during the
update!
Tips
To Next Page
Loading...