Setting the [Full Screen Display] tab
261
OLYMPUS Studio Preferences
• To set the [Multi Monitor] item, the Macintosh or Windows OS must detect at
least 2 connected monitors. If only 1 monitor is detected, [Multi Monitor] is
grayed out and cannot be set.
• If the [Margin] setting is changed, the following settings are also changed:
Margins for single image view area in View Mode
Margins used when slide shows are executed
• To remove the full screen display on a monitor specified in the Multi Monitor
settings, follow these steps.
Press the [Esc] key.
Double-click the full screen display.
Note
Tips
To Next Page
Loading...