Take pictures.
In bulb and live bulb modes, k
eep the shutter button pressed. The exposure ends when the
button is released.
In time and live time modes, press the shutter button all the way down once to start the
exposure and again to end it.
During live time photography, you can refresh the preview by pressing the shutter button
halfway.
The exposure ends automatically when the time selected for [Bulb/Time Timer] is reached.
gCCustom Menu n> [Bulb/Time Timer] (P. 285)
[Noise Reduct.] is applied after shooting. The display shows the time remaining until
the process is complete. You can choose the conditions under which noise reduction is
performed. gCCustom Menu m> [Noise Reduct.] (P. 284)
Some limitations apply to the choice of ISO sensitivity settings available.
Bulb photography is used in place of live bulb photography when multiple exposure, keystone
compensation, or fisheye correction is in effect.
Time photography is used in place of live time photography when multiple exposure, keystone
compensation, or fisheye correction is in effect.
During shooting, there are limits on the settings for the following functions.
Sequential shooting, self-timer shooting, interval timer photography, AE bracketing, flash
bracketing, focus bracketing, focus stacking, etc.
[KImage Stabilizer] (P. 134) turns off automatically.
Depending on camera settings, the temperature, and the situation, you may notice noise or bright
spots in the monitor. These may sometimes appear in pictures even when [Noise Reduct.] is
enabled. gCCustom Menu m> [Noise Reduct.] (P. 284)
Starry sky AF can be used for shots of the night sky. g“Choosing a focus mode (AF
Mode) (P. 118), “Using Starry Sky AF” (P. 121)
Display brightness can be adjusted during bulb/time photography. gCCustom Menu n>
[Bulb/Time Monitor] (P. 285)
During bulb/time photography, display brightness is adjusted to make even poorly-lit subjects easy
to see. You can choose whether to prioritize image quality or display speed. gCCustom Menu
j> [Live View Boost] (P. 280)
In mode B (bulb), you can adjust focus manually while the exposure is in progress. This allows you
to defocus during the exposure or focus at the end of the exposure. gCCustom Menu d>
[Bulb/Time Focusing] (P. 318)
60
Long Exposures (B: Bulb/Time)
8.
C
C
C
C
-
C
C
B
B
B
B