WWW.NNC.IR
Macro Reference
474
Vision System FH/FZ5 Series
User’s Manual (Z340)
Example
Uses the *MEASUREDISPG subroutine of the Unit Macro processing unit to display the rectangle whose
upper-left and lower-right corner coordinates are the coordinates measured by the Processing Unit numbers
5 and 6 search processing units respectively. The measured X and Y coordinates can be gotten with External
Reference Data numbers 6 and 7 respectively.
To display the string at the fixed position regardless of the position compensation result, specify the assigned
processing unit number to this Unit Macro processing unit (where the *MEASUREDISPG subroutine is used)
for the <unitNo> parameter.
Useable Modules
Unit macro
Supported Versions
Version 3.50 or later
Related Items
*MEASUREDISPG
Rem Get the measurement result.
GetUnitData 5, 6, X_LEFTTOP#
GetUnitData 5, 7, Y_LEFTTOP#
GetUnitData 6, 6, X_RIGHTBOTTOM#
GetUnitData 6, 7, Y_RIGHTBOTTOM#
Rem Draw the image
DrawBox Int(X_LEFTTOP#), Int(Y_LEFTTOP#), Int(X_RIGHTBOTTOM#), Int(Y_RIGHTBOTTOM#), 0, UnitNo
Return
GetUnitData (Reference: X Details (p.552)) Int (Reference: X Details (p.575))
SetDrawStyle (Reference: X Details (p.700)) UnitData (Reference: X Details (p.778))
UnitNo (Reference: X Details (p.790)) Ut (Reference: X Details (p.793))
To Next Page
Loading...
Need help?
General
