Omron SYSMAC FH Series User Manual

WWW.NNC.IR
Macro Reference
491
8
Appendices
Vision System FH/FZ5 Series
User’s Manual (Z340)
Example
Uses the *MEASUREDISPG subroutine of the Unit Macro processing unit to display the wide line with width
of 10 whose starting and ending point coordinates are the coordinates measured by the Processing Unit
numbers 5 and 6 search processing units respectively. The measured X and Y coordinates can be gotten
with External Reference Data numbers 6 and 7 respectively.
To display the string at the fixed position regardless of the position compensation result, specify the assigned
processing unit number to this Unit Macro processing unit (where the *MEASUREDISPG subroutine is used)
for the <unitNo> parameter.
Useable Modules
Unit macro
Supported Versions
Version 3.50 or later
Related Items
*MEASUREDISPG
Rem Get the measurement result.
GetUnitData 5, 6, X_START#
GetUnitData 5, 7, Y_START#
GetUnitData 6, 6, X_END#
GetUnitData 6, 7, Y_END#
Rem Draw the image
DrawLineW Int(X_START#), Int(Y_START#), Int(X_END#), Int(Y_END#), 10, 0, UnitNo
Return
GetUnitData (Reference: X Details (p.552)) Int (Reference: X Details (p.575))
SetDrawStyle (Reference: X Details (p.700)) UnitData (Reference: X Details (p.778))
UnitNo (Reference: X Details (p.790)) Ut (Reference: X Details (p.793))

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English