Omron SYSMAC FH Series User Manual

WWW.NNC.IR
Operation log input information list
867
8
Appendices
Vision System FH/FZ5 Series
User’s Manual (Z340)
Checking Operation Restrictions
CheckAccessControl
Parameters
Return value
For an operation that is not permitted for the logged in user, returns 0.
For an operation that is permitted for the logged in user, returns value other than 0.
Clearing the Logging Count Information.
ClearImageLogCount
Parameters
None.
Return value
If the image logging count is cleared successfully, returns 0.
Otherwise, returns value other than 0.
SetTimeWindow
Sets the display attributes for the measurement processing
time display window.
Reference: Details (p.875)
SetUnitDataN Sets processing unit data. ---
SetUnitDataN2 Sets processing unit data. ---
SetUnitDataS Sets processing unit data. ---
SetUnitDataS2 Sets processing unit data. ---
SetUnitFigure Sets the figure data for a processing unit. Reference: Details (p.733)
SetUnitTitle Sets a processing unit title name. Reference: Details (p.737)
SetUserAccount Sets a user account. Reference: Details (p.875)
StartRemoteOperation Starts remote operation. ---
SyncData Synchronizes the setting data between Core RA processes. Reference: Details (p.876)
SystemReset Executes a system reset. Reference: Details (p.754)
UnLockMeasureStop Sets measurement trigger input to enabled. Reference: Details (p.876)
UserLogin Logs in as the specified user. Reference: Details (p.876)
UserLogout Logs out. Reference: Details (p.877)
name Operation identifier name
Name Description References

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English