WWW.NNC.IR
Arranging Windows
88
Vision System FH/FZ5 Series
User’s Manual (Z340)
• To Limit the Number of Image Panes Assignable to Each Layout
You can use layout modification to limit the range of Image Pane numbers that can be used on each
layout.
1 When the Layout Modification Pane is active, click the icon in the upper right corner
of the Image Display Pane.
2 A settings dialog box for the Image Pane number range is displayed. Set following
settings.
Error Pane
This pane shows errors, such as Camera connection errors.
If you add an Error Pane to a layout and an error occurs that normally causes an error dialog box to appear,
an error string will appear in the Error Pane.
This is useful for remote operation or situations where an error dialog box would be difficult to close.
The latest error string (error message) is displayed on the top line of the error pane.
Also the error pane can display the error messages of up to 100.
The Error Pane is assigned to layout 8 by default.
Editable items Description
Image window
number
You can add up to 24 Image Panes within an Image Display Pane.
0 to 23
The Error Pane displays error messages for the following errors.
• System errors
• Fan or voltage errors
• Camera connection errors
• Changes made to the connected Camera
• Camera overcurrent detected
• Image logging disk write errors
• Output control timeout errors (parallel I/O, PLC Link, or EtherNet/IP)
• PLC Link communications errors
• Parallel I/O overcurrent detected
• Settings data load errors
• Settings data transfer errors
• Output timeouts (EtherCAT)
• Output buffer errors (EtherCAT)
To Next Page
Loading...
