Planmeca PlanMill 40 - Additional Tools

Chapter B: Preventive maintenance
Technical manual Planmeca PlanMill 40 23
Figure 10: Planmeca PlanMill 40 technician 12 months maintenance kit
NOTE
The Planmeca PlanMill 40 technician 12 months maintenance kit includes 1 x PlanMill 40
technician 4 months maintenance kit (parts 3, 4, 7 and 8 in the figure above).
Additional tools
• Dental mirror
• Ellipsoidal burr
• Conical burr
• Tapered burr
• Coolant
• Paper towels
• 8 cm long screwdriver
• Soft nylon brush (i.e. toothbrush)
• Soft cylinder shaped brush (for suction hose)
• Allen key set
1 Tubing 3/8"id, 5/8"od,
silicone bulk (8.625")
2 Tool bumper 3 2 x Ellipsoidal milling
bur (yellow stripes)
4 2 x O-ring, small, cap 5 2 x Rope packing 1/8,
379mm long
6 2 x Collet, 4.0mm
7 2 x IPS Empress CAD
for PlanMill HT A1 I12
8 2 x O-ring, large, cap 9 Tool changer Nose seal