M10 AT Commands Set
M10_ATC_V1.01 - 102 -
Parameters
<sca> GSM 04.11 RP SC address Address-Value field in
string format; BCD numbers (or GSM default alphabet
characters) are converted to characters of the currently
selected TE character set (specified by +CSCS in TS
07.07); type of address given by <tosca>
<tosca> Service center address format GSM 04.11 RP SC
address Type-of-Address octet in integer format
(default refer <toda>)
<scaAlpha> string type
Service center address alpha data
Reference
GSM 07.05
Note
Only if Command +SMEXTRAINFO=1 , <scaAlpha> is available. And
nothing can be displayed if it is empty.
4.2.14 AT+CSCB Select Cell Broadcast SMS Messages
AT+CSCB Select Cell Broadcast SMS Messages
Response
+CSCB: <mode>,<mids>,<dcss>
OK
Read Command
AT+CSCB?
Parameters
see Write Command
Response
+CSCB: (list of supported <mode>s)
OK
Test Command
AT+CSCB=?
Parameters
see Write Command
Response
TA selects which types of CBMs are to be received by the ME.
Note: The Command writes the parameters in NON-VOLATILE memory.
OK
If error is related to ME functionality:
+CMS ERROR: <err>
Write Command
AT+CSCB=
<mode>[,mids>[,
<dcss>]]
Parameters
<mode> 0 message types specified in <mids> and <dcss> are
accepted
1 message types specified in <mids> and <dcss> are not
accepted
<mids> string type; all different possible combinations of CBM
message identifiers (refer <mid>) (default is empty
string); e.g. "0,1,5,320-478,922".
To Next Page
Loading...
