Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 104 -
+CSMP: (list of supported <fo>s),(list of supported <vp>s), (list of
supported <pid>s), (list of supported <dcs>s)
OK
AT+CSMP=?
Parameters
see Write Command
Response
TA selects values for additional parameters needed when SM is sent to the
network or placed in a storage when text mode is selected (+CMGF=1). It is
possible to set the validity period starting from when the SM is received
b
y
the SMSC (<vp> is in range 0... 255) or define the absolute time of the
validity period termination (<vp> is a string).
Note: The Command writes the parameters in NON-VOLATILE memory.
OK
Write Command
AT+CSMP=[<fo
>[<vp>[,pid>[,<d
cs>]]]]
Parameters
<fo> depending on the Command or result code: first octet
of GSM 03.40 SMS-DELIVER, SMS-SUBMIT
(default 17), SMS-STATUS-REPORT, or
SMS-COMMAND (default 2) in integer format. SMS
status report is supported under text mode if <fo> is set
to 49.
<vp> depending on SMS-SUBMIT <fo> setting: GSM 03.40
TP-Validity-Period either in integer format (default
167) or in time-string format (refer <dt>)
<pid> GSM 03.40 TP-Protocol-Identifier in integer format
(default 0).
<dcs> GSM 03.38 SMS Data Coding Scheme in Integer
format.
Reference
GSM 07.05
Note
4.2.17 AT+CSMS Select Message Service
AT+CSMS Select Message Service
Response
+CSMS: <service>,<mt>,<mo>,<bm>
OK
Read Command
AT+CSMS?
Parameters
see Write Command
Test Command
AT+CSMS=?
Response
+CSMS: (list of supported <service>s)
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English