M10 AT Commands Set
M10_ATC_V1.01 - 105 -
OK
Parameters
see Write Command
Response
+CSMS: <mt>,<mo>,<bm>
OK
If error is related to ME functionality:
+CMS ERROR: <err>
Write Command
AT+CSMS=
<service>
Parameters
<service>
0 GSM 03.40 and 03.41 (the syntax of SMS AT
commands is compatible with GSM 07.05 Phase 2
version 4.7.0; Phase 2+ features which do not require
new Command syntax may be supported (e.g. correct
routing of messages with new Phase 2+ data coding
schemes))
128 SMS PDU mode - TPDU only used for
sending/receiving SMSs.
<mt> Mobile Terminated Messages:
0 Type not supported
1 Type supported
<mo> Mobile Originated Messages:
0 Type not supported
1 Type supported
<bm> Broadcast Type Messages:
0 Type not supported
1 Type supported
Reference
GSM 07.05
Note
To Next Page
Loading...
