Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 122 -
Support for this Command will be hardware dependant
6.2.12 AT+QHSBTN Headset Button Status Reporting
AT+ QHSBTN Headset Button Status Reporting
Response
+
QHSBTN: (<mode>s)
OK
Test Command
AT+
QHSBTNT
=?
Parameter
See Write Command
Response
+QHSBTN: <mode>,<headset button press>
OK
Read Command
AT+
QHSBTN?
Parameters
See Write Command
Response
OK
ERROR
If error is related to ME functionality:
+CMS ERROR: <err>
Unsolicited result code
+QHSBTN: <mode>,<headset button press>
Write Command
AT+
QHSBTN=<
mode>
Parameters
<mode> a numeric parameter which indicates whether an
unsolicited event code (indicating whether the
headset button has been pressed) should be sent to
the terminal.
0 not send unsolicited event code
1 send unsolicited event code
<headset attach> a numeric parameter which indicates whether a
headset button has been pressed or not
0 not pressed
1 pressed
Reference Note
Support for this Command will be hardware dependant
6.2.13 AT+QSIMSTAT SIM Inserted Status Reporting
AT+QSIMSTAT SIM Inserted Status Reporting
Test Command
AT+QSIMSTAT
=?
Response
+QSIMSTAT: (list of supported <n>s)
OK
Quectel