Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 23 -
V.25ter z Default 10 = LF.
2.2.18 ATS5 Set Command Line Editing Character
ATS5 Set Command line editing character
Read Command
ATS5?
Response
<n>
OK
Response
This parameter setting determines the character recognized by TA as a
request to delete from the Command line the immediately preceding
character.
OK
Write Command
ATS5=<n>
Parameter
<n> 0-
8-127 response formatting character
Reference
V.25ter
Note
z Default 8 = Backspace.
2.2.19 ATS6 Set Pause Before Blind Dialing
ATS6 Set Pause Before Blind Dialing
Read Command
ATS6?
Response
<n>
OK
Response
OK
Write Command
ATS6=<n>
Parameter
<n> 0-
2-10 number of seconds to wait before blind dialing
Reference
V.25ter
Note
z No effect for GSM
2.2.20 ATS7 Set Number Of Seconds To Wait For Connection Completion
ATS7 Set Number Of Seconds To Wait For Connection Completion
Read Command
ATS7?
Response
<n>
OK
Response
This parameter setting determines the amount of time to wait for the
connection completion in case of answering or originating a call.
OK
Write Command
ATS7=<n>
Parameter
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English