Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 160 -
3771 call setup in progress
3772 SIM powered down
A.2 Summary of CMS ERROR Codes
Final result code +CMS ERROR: <err> indicates an error related to mobile equipment
or network. The operation is similar to ERROR result code. None of the following
commands in the same Command line is executed. Neither ERROR nor OK result code
shall be returned.
<err> values are mostly used by common messaging commands:
Code of <err> Meaning
300 ME failure
301 SMS ME reserved
302 operation not allowed
303 operation not supported
304 invalid PDU mode
305 invalid text mode
310 SIM not inserted
311 SIM pin necessary
312 PH SIM pin necessary
313 SIM failure
314 SIM busy
315 SIM wrong
316 SIM PUK required
317 SIM PIN2 required
318 SIM PUK2 required
320 memory failure
321 invalid memory index
322 memory full
330 SMSC address unknown
331 no network
332 network timeout
500 unknown
512 SIM not ready
513 message length exceeds
514 invalid request parameters
515 ME storage failure
517 Invalid service mode
528 More Message to Send state error
529 MO SMS is not allow
530 GPRS is suspended
531 ME storage full
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English