Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 81 -
3.2.55 AT+CPUC Price Per Unit And Currency Table
AT+CPUC Price Per Unit And Currency Table
Response
OK
Test Command
AT+CPUC=?
Parameters
see Write Command
Response
+CPUC: <currency>,<ppu>
OK
+CME ERROR: <err>
Read Command
AT+CPUC?
Parameters
See Write Command
Response
+CME ERROR: <err>
Write Command
AT+CPUC=<cur
rency>,<ppu>[,<
passwd>]
Parameters
<currency> string type; three-character currency code (e.g. "GBP",
"DEM");
character set as specified by Command Select TE
Character
Set +CSCS
<ppu> string type; price per unit; dot is used as a decimal
separator(e.g. "2.66")
<passwd> string type; SIM PIN2
Reference
GSM 07.07 [13]
Note
3.2.56 AT+CCWE Call Meter Maximum Event
AT+CCWE Call Meter Maximum Event
Response
+CCWE: (list of supported <mode>s)
OK
+CME ERROR: <err>
Test Command
AT+CCWE=?
Parameter
see Write Command
Response
+CCWE: <mode>
OK
+CME ERROR: <err>
Read Command
AT+CCWE?
Parameter
See Write Command
Quectel