Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 112 -
OK
Parameter
See Write Command
Write Command
AT+CGCLASS=
<class>
Response
OK
ERROR
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<class> a string parameter which indicates the GPRS mobile class
(in descending order of functionality)
A class A (highest)
B class B
CG class C in GPRS only mode
CC class C in circuit switched only mode (lowest)
Reference
GSM07.07
Note
Class A is not supported by the Quectel GPRS solution.
5.2.9 AT+CGEREP Control Unsolicited GPRS Event Reporting
AT+CGEREP Control Unsolicited GPRS Event Reporting
Test Command
AT+CGEREP=?
Response
+CGEREP: (list of supported <mode>s)
OK
Parameter
See Write Command
Read Command
AT+CGEREP?
Response
+CGEREP: <mode>
OK
Parameter
See Write Command
Write Command
AT+CGEREP=<
mode>
Response
OK
ERROR
Parameter
<mode> 0 buffer unsolicited result codes in the MT; if MT result
code buffer is full, the oldest ones can be discarded. No
codes are forwarded to the TE.
1 discard unsolicited result codes when MT-TE link is
reserved (e.g. in on-line data mode); otherwise forward
them directly to the TE
Unsolicited Result Codes supported:
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English