Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 95 -
in integer format (when first character of <da> is + (IRA 43)
default is 145, otherwise default is 129)
129 Unknown type(IDSN format number)
145 International number type(ISDN format )
<length> integer type value indicating in the text mode (+CMGF=1)
the length of the message body <data> (or <cdata>)
in characters; or in PDU mode (+CMGF=0), the length
of the actual TP data unit in octets (i.e. the RP layer
SMSC address octets are not counted in the length)
<pdu> In the case of SMS: GSM 04.11 SC address followed by
GSM 03.40 TPDU in hexadecimal format: ME/TA
converts each octet of TP data unit into two IRA
character long hexadecimal number (e.g. octet with
integer value 42 is presented to TE as two characters
2A (IRA 50 and 65)). In the case of CBS: GSM
03.41 TPDU in hexadecimal format.
<index> Index of message in selected storage <mem2>
Reference
GSM 07.05
Note
4.2.7 AT+CMSS Send SMS Message From Storage
AT+CMSS Send SMS Message From Storage
Test Command
AT+CMSS=?
Response
OK
Response
TA sends message with location value <index> from message storage
<mem2> to the network (SMS-SUBMIT). If new recipient address <da> is
given, it shall be used instead of the one stored with the message. Reference
value <mr> is returned to the TE on successful message delivery. Values can
be used to identify message upon unsolicited delivery status report result
code.
1) If text mode(+CMGF=1) and sending successful:
+CMGS: <mr> [,<scts>]
OK
2) If PDU mode(+CMGF=0) and sending successful:
+CMGS: <mr> [,<ackpdu>]
OK
3)If error is related to ME functionality:
+CMS ERROR: <err>
Write Command
AT+CMSS=<ind
ex>[,<da>[,<toda
>]]
Parameters
<index> integer type; value in the range of location numbers supported
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English