Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 47 -
hexadecimal numbers from 00 to FF;
"IRA" international reference alphabet
"PCCP437" PC character set Code
“UCS2” UCS2 alphabet
"8859-1" ISO 8859 Latin 1 character set
Read Command
AT+CSCS?
Response
+CSCS: <chset>
OK
Parameter
<chset> see Test Command
Write Command
AT+CSCS=<chse
t>
Response
Sets which character set <chset> are used by the TE. The TA can then
convert character strings correctly between the TE and ME character sets.
Parameter
<chset> see Test Command
Reference
GSM 07.07 [13]
Note
3.2.14 AT+CSTA Select Type Of Address
AT+CSTA Select Type Of Address
Test Command
AT+CSTA=?
Response
+CSTA: (129,145, 161,)
OK
Read Command
AT+CSTA?
Response
+CSTA: <type>
OK
Parameter
< type > Current address type setting.
Reference
GSM 07.07 [13]
Note
The ATD Command overrides this setting when a number is
dialed.
129 Unknown type(IDSN format number)
161 National number type(IDSN format)
145 International number type(ISDN format )
3.2.15 AT+CHLD Call Hold And Multiparty
AT+CHLD Call Hold And Multiparty
Test Command
AT+CHLD=?
Response
+CHLD: (list of supported <n>s)
OK
Quectel