Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 123 -
Parameter
See Write Command
Response
+QSIMSTAT: <n>,<SIM inserted>
OK
Read Command
AT+QSIMSTAT
?
Parameter
See Write Command
Response
OK
ERROR
If error is related to ME functionality:
+CMS ERROR: <err>
Write Command
AT+QSIMSTAT
=<n>
Parameters
<n> a numeric parameter which indicates whether to show an
unsolicited event code indicating whether the SIM has just been
inserted or removed.
0 disable
1 enable
< SIM inserted> a numeric parameter which indicates whether SIM
card has been inserted.
0 not inserted
1 inserted
Reference Note
6.2.14 AT+QLDTMF Generate Local DTMF Tone
AT+ QLDTMF Generate Local DTMF Tone
Response
OK
ERROR
Write Command
AT+QLDTMF=<
n>[,<DTMF
string>]
Parameters
<n> a numeric parameter(1-1000) which indicates the
duration of all DTMF tones in < DTMF -string> in 1/10
secs
< DTMF -string> a string parameter which has a max length of 20 chars
of form < DTMF >, separated by commas.
< DTMF > A single ASCII chars in the set 0-9,#,*,A-D.
Execution
Command
AT+QLDTMF
Response
OK
Aborts any DTMF tone currently being generated and any DTMF tone
sequence.
Reference
GSM07.07
Note
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English