Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 161 -
532 doing SIM refresh
A.3 Summary of URC
Index URC display Meaning Condition
1 +CMTI:<mem>,<index> New message received, and
saved to memory
AT+CNMI =2, 1
2 +CMT:[<alpha>],<length><CR>
<LF><pdu>
New short message is received
and output directly to TE(PDU
mode)
AT+CNMI =2, 2
3 +CMT:<oa>,[<alpha>],<scts>[,<
tooa>,<fo>,<pid>,<dcs>,<sca>,<
tosca>,<length>]<CR><LF><da
ta>
New short message is received
and output directly to TE(Text
mode)
AT+CNMI =2, 2
4 +CBM:<length><CR> New CBM is received and
output directly(PDU mode)
AT+CNMI =2, 2
5 +CBM:<sn>,<mid>,<dcs>,<pag
e>,<pages>,<CR>,<LF><data>
New CBM is received and
output directly to TE(Text
mode)
AT+CNMI =2, 2
6 +CDS:<length><CR><LF><pdu
>
New CDS is received and output
directly(PDU mode)
AT+CNMI =2, 2
7 +CDS:<fo>,<mr>,[<ra>],[<tora>
],<scts>,<dt>,<st>
New CDS is received and output
directly to TE(Text mode)
AT+CNMI =2, 2
8 +CGEV:NW
DEACT<PDP_type>,<PDP_add
r>[,<cid>]
GPRS network detach AT+CGEREP=1
9 +CGEV:ME
DEACT<PDP_type>,<PDP_add
r>[,<cid>]
GPRS ME detach AT+ CG ERE P= 1
10 +CGEV:NW DETACH GPRS network detach AT+CGEREP=1
11 +CGEV:ME DETACH GPRS ME detach AT+CGEREP=1
12 +CVGREG:1 Network registered AT+CGREG=1
13 +CGREG:0 Network unregistered AT+CGREG=2
14 +CVGREG:1,<lac><ci> Network registered, with
location code
AT+CGRE G=2
15 +CVGREG:0,<lac><ci> Network unregistered, with
location code
AT+CGRE G=2
16 +QEXTHS:<mode>,<headset
attach>
Headset attachment status
change
AT+QEXTHS=1
17 +QHSBTN:<mode>,<headset
button press>
Headset button pressed AT+QHSBTN=1
18 +QCGTIND A CS voice call, CS data,fax call
or GPRS session termination
indicator
AT+QCGT IN D=
1
19 +CSQN:<rssi>,<ber> Signal quality change AT+QEXTUNSO
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English