M10 AT Commands Set
M10_ATC_V1.01 - 31 -
Parameter
<revision> revision of software release
Reference
V.25ter
Note
2.2.38 AT+GOI Request Global Object Identification
AT+GOI Request Global Object Identification
Response
OK
Test Command
AT+GOI=?
Parameter
Response
TA reports one or more lines of information text which permit the user to
identify the device, based on the ISO system for registering unique object
identifiers.
<Object Id>
OK
Execution
Command
AT+GOI
Parameter
<Object Id> identifier of device type
see X.208, 209 for the format of <Object Id>
Reference
V.25ter
Note
For example in M10 wireless module, string “M10” is displayed.
2.2.39 AT+GSN Request TA Serial Number Identification (IMEI)
AT+GSN Request TA Serial Number Identification(IMEI)
Response
OK
Test Command
AT+GSN=?
Parameter
Response
TA reports the IMEI (international mobile equipment identifier) number in
information text which permit the user to identify the individual ME device.
<sn>
OK
Execution
Command
AT+GSN
Parameter
<sn> IMEI of the telephone(International Mobile station
Equipment Identity)
Reference
V.25ter
Note
z The serial number (IMEI) is varied by individual ME device.