Quectel M10 At Command Set

M10 AT Commands Set
M10_ATC_V1.01 - 69 -
channel bit error rate <ber> from the ME. Test Command returns values
supported by the TA.
Parameters
<rssi>
0 -113 dBm or less
1 -111 dBm
2...30 -109... -53 dBm
31 -51 dBm or greater
99 not known or not detectable
<ber> (in percent):
0...7 as RXQUAL values in the table in GSM 05.08 [20] subclause 8.2.4
99 not known or not detectable
Reference
GSM 07.07 [13]
Note
3.2.38 AT+FCLASS FAX: Select, Read Or Test Service Class
AT+FCLASS FAX: Select, Read Or Test Service Class
Response
+FCLASS: (list of supported <n>s)
OK
Test Command
AT+FCLASS=?
Parameters
see Write Command
Response
+FCLASS: <n>
OK
Read Command
AT+ FCLASS?
Parameters
See Write Command.
Response
TA sets a particular mode of operation (data fax). This causes the TA to
process information in a manner suitable for that type of information
OK
Write Command
AT+FCLASS=
[<n>]
Parameter
<n>
0 data
1 fax class 1 (TIA-578-A)
Reference
GSM 07.07 [13]
Note
3.2.39 AT+FMI FAX: Report Manufactured ID
AT+FMI FAX: Report Manufactured ID
Test Command
AT+ FMI =?
Response
OK
Quectel

Quectel M10 Specifications

General

Brand	Quectel
Model	M10
Category	GSM/GPRS Modules
Language	English